Ultrawide & Thin Aluminium Sheets for Trailer
Ultrawide & Thin Aluminium Sheets for Trailer Introduction
Aluminium focus on high-end aluminium alloy R&D and manufacturer, providing customers with a variety suitable for proof and side wall of Van Trailer.
The three advantages of ’s Trailer Aluminium sheet
Large size : Max.width reaches 2650mm and the length >=1000mm
High uniformity : annealed by continuous heat treatment line, and the properties differences of the same coil and between coils are small.
Precise dimension and excellent flatness : dimension and flatness meet EN/ASTM standard.
Ultrawide & Thin Aluminium Sheets for Trailer Chemical Composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Standard |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | 0.1 | - | EN/ASTM |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | 0.25 | - | |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | - |
Ultrawide & Thin Aluminium Sheets for Trailer Specification RoofPlate
| Alloy | Temper | Thickness | Width | Length |
| 3004 | H36/h38 | 0.2-3.5 | 2000-2650 | >=10000 |
| 5052 | H32/h34 | 0.2-3.5 | 2000-2650 | >=10000 |
Side walls
| Alloy | Temper | Thickness | Width | Length |
| 3004 | H36/h38 | 0.2-3.5 | 2000-2650 | >=10000 |
| 5052 | H32/h34 | 0.2-3.5 | 2000-2650 | >=1000 |
Ultrawide & Thin Aluminium Sheets for Trailer Mechanical Properties
| Alloy | Temper | Yield strength | Tensile strength | Elongation | standard |
| 3003 | H14 | >=115 | 140-180 | >=3 | ASTM |
| H24 | |||||
| H16 | >=145 | 165-205 | >=3 | ||
| H26 | |||||
| 3004 | H38 | >=215 | 165-205 | >=3 | |
| 5052 | H32 | >=160 | 215-265 | >=4 | |
| H36 | >=200 | 255-305 | >=2 |
